SP88 / POWER UPGRADES
Vehicle & Camper Power
A practical route from your daily loads to batteries, solar and reliable charging.
Plan dependable accessory power for lighting, fridges and tool chargers. Start with what you need to run and how often you can recharge. This guide covers leisure and accessory systems, not EV or hybrid traction-battery modifications.
Choose the system around the job
Vehicle essentials
List each appliance’s watts and daily running hours. Multiply them to estimate watt-hours, then add the loads together. A 20W lamp used for five hours consumes 100Wh; a 60W device used for two hours adds 120Wh. These are illustrative loads, not a recommended battery size. Allow for conversion losses, reserve capacity and days without charging.
The core system is a securely mounted leisure battery, its required battery-management system (BMS), protected DC distribution and suitable alternator charging. Check the exact battery’s allowed charge/discharge current and whether its BMS is built in or must be purchased separately. Do not assume batteries can be connected in series.
Work-van AC power
Add a pure sine-wave inverter for suitable 230V appliances. Choose continuous output and starting surge from the actual loads, not just the headline VA rating. Tool chargers, motors and compressors have different demands. Check battery/BMS current, ventilation, cable route and protective devices before choosing an inverter.
Choose each charging route
Driving: a suitable DC–DC charger manages alternator-to-leisure-battery charging. The Victron Orion XS family includes different voltage/current versions. Input-current limits and engine detection must suit alternator headroom and the vehicle. A 50A label does not mean every vehicle should charge at 50A.
Solar: use a matched standalone MPPT controller or a verified combined DC–DC/MPPT unit. Check the exact hardware revision, PV current and cold-weather open-circuit voltage. Match roof area, secure mounts, glands and compatible PV connectors. Portable panels also need correct polarity, weather suitability and a compatible charging input.
Mains or generator: use a battery charger with the correct chemistry, voltage and UK AC input, or an inverter/charger. A plain inverter cannot charge a battery. See the garage and backup-charging guide for generator limits and winter planning.
Wiring, monitoring and handover
There is no universal high-current wiring kit. Specify current, cable length, voltage drop, installation conditions, copper cable, lugs and termination method. Fuses, holders, isolators and covered busbars need suitable DC ratings; lithium battery faults also make fuse interrupt capacity important.
Select a suitably rated shunt and monitor; battery voltage alone is a poor runtime guide. Follow the exact battery’s cold-charge limits and storage instructions. At handover, retain the circuit diagram, fuse schedule, charger settings and maintenance instructions.
For SP88 vehicle assessment, use the existing campervan electrical service. Provide equipment labels, daily loads, vehicle details and installation photographs before a system is quoted. This guide is not a pre-approved or purchasable bundle.
References checked 29 October 2026: Victron Orion XS; Wiring Unlimited; battery-specific technical data.
Plan the right system first.
Tell us what you need to run, where it will be installed and how you will recharge. Vehicle installations start with an assessment of your equipment and loads.
Illustrative photography: Jackery Power Station and Nuno Marques / Unsplash. Images illustrate power applications; they are not SP88 installation photographs or a specified equipment bundle.