Parking sensors fitted Chessington with Sp88, A service that come to your place & provides affordable and reliable car servicing. Judging the distance between the front and rear of your car using our parking sensor kits. Our sensors tell you when an obstacle is in your way while parking and help prevent parking damage. This way you can maneuver safely, knowing that you have a parking sensor to help you spot hard to see obstacles at the front and or rear. So, if you live in Malden and need a parking sensor kit fitted, SP88 is here to help. We offer the high quality service at a fraction of the cost, serving areas nearby London and Surrey. You can trust us to supply and fit ParkSafe PS540 Intelligent system parking sensors, which we can guarantee will stand the test of time.
We supply and fit ParkSafe PS540 Intelligent system parking sensors.
We offer 1 years labour warranty with our installations.
Ranges Of Services
Rear Parking Sensors supplied and fitted from £120.
Front Parking Sensors supplied and fitted from £160.
Front and Rear Parking Sensors supplied and fitted from £260.
Have your sensors painted to match for £30.
Have your Factory fitted parking sensors repaired by booking a Diagnostic appointment.
Are you in need of high-quality, attention to detail, a professional that is friendly and mobile? Call us for Parking Sensors supplied and fitted in areas near Malden, Surrey and London. You can trust us SP88 to supply and fit ParkSafe PS540 Intelligent system parking sensors.
Frequently Asked Questions
Ultrasonic parking sensors use high-frequency sound waves to detect objects. These sensors emit low-frequency acoustic pulses that report reflected sound off nearby objects to a control unit. The controller calculates the distance from your vehicle to the object. The system then warns the driver via an audible alarm. Rear parking sensors require a working Reverse light, and if that’s going to be a problem, our Auto electrician is ready.
Front parking sensors are activated via a switch which will be connected to wiring that is supplied with what is called an ignition feed. EG 12v socket.
We rarely remove any bumpers. We mark where the sensors will function well and be symmetrically and aesthetically pleasing. Four holes are then drilled in your bumper with a special drill bit for accuracy. The wiring for the sensors is neatly hidden behind the bumper and feed into the vehicle. An audible buzzer is fitted in a location so it can be easily heard but not on display. Finally, we take power from the reverse lights or an ignition feed for the front. Our final work is neat, and you won’t see any wiring.
No matter your experience or skill, there are blind spots you may miss while driving, especially in tight spots. You may find it difficult to maneuver in a tight spot without hitting something.
Approximately 1.5 hours for rear parking sensors and 4 to 4.5 hours to fit front and rear parking sensors. The entire procedure will not be rushed to be complete. Whether you are installing only the front or both front and rear parking sensors the wiring will be tidy, and all components will be hidden away to complement the factory finish look.